FreeStatistics.org

Free Statistics

of Irreproducible Research!

Description of Statistical Computation

Author's title

Author*The author of this computation has been verified*
R Software Modulerwasp_autocorrelation.wasp
Title produced by software(Partial) Autocorrelation Function
Date of computationMon, 27 Oct 2008 04:28:50 -0600
Cite this page as followsStatistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?v=date/2008/Oct/27/t1225103380tg35ghs912q8t1z.htm/, Retrieved Sun, 19 May 2024 16:39:15 +0000
Statistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?pk=19190, Retrieved Sun, 19 May 2024 16:39:15 +0000
QR Codes:

Original text written by user:
IsPrivate?No (this computation is public)
User-defined keywords
Estimated Impact170

Tree of Dependent Computations

Family? (F = Feedback message, R = changed R code, M = changed R Module, P = changed Parameters, D = changed Data)
F     [Univariate Explorative Data Analysis] [Investigation Dis...] [2007-10-21 17:06:37] [b9964c45117f7aac638ab9056d451faa]
F RMPD  [(Partial) Autocorrelation Function] [] [2008-10-23 10:32:19] [28075c6928548bea087cb2be962cfe7e]
-   P     [(Partial) Autocorrelation Function] [q2 autocorrelatio...] [2008-10-23 12:14:19] [7173087adebe3e3a714c80ea2417b3eb]
F   P         [(Partial) Autocorrelation Function] [q2 autocorrolations] [2008-10-27 10:28:50] [f24298b2e4c2a19d76cf4460ec5d2246] [Current]
Feedback Forum
2008-11-03 16:27:39 [Lindsay Heyndrickx] [reply] 
Op de run sequence plot kan je zeer moeilijk zien of er autocorrelatie is dus we kunnen hier best naar de tweede link kijken. Uit de grafiek kunnen we afleiden dat er autocorrelatie is en dat deze gegevens dus niet random zijn. Er is correlatie met een seizonale betekenis.
2008-11-03 16:30:11 [Lindsay Heyndrickx] [reply] 
nr 2: Hier is de naar de juiste grafieken gekeken, er is inderdaad een knik in de density plot en een kleine verhoging in het histogram maar dit is niet erg uitgesproken dus hier is geen reden om aan te nemen dat hier geen normaal verdeling is. We kijken hier ook naar de qq-plot en zien dat de punten redelijk dicht tegen de rechte liggen dus hier is sprake van een normaal verdeling.

nr 3: Hier is naar de foute grafiek gekeken. Hier had de run sequence plot gebruikt moeten worden. Hier moet je kijken of het niveau constant blijft of niet. Dit kan je doen door de central tendancy hier te berekenen en te kijken of het gemiddelde constant blijft.
Als je dit doet zie je dat er een kleine verandering is maar dat het steeds schommelt rond de 87. Dit blijft dus constant.

nr 4: Hier moest naar de run sequence plot gekeken worden. Kijken hoe de reeks door de tijd heen gespreid is. Hier kunnen we zien dat het begin anders is dan de tweede helft van de grafiek. Er is dus een verandering van spreiding in de tijd.

Post a new message

Dataset

Dataseries X:
Download CSV
Histogram
Boxplots 
109.20
88.60
94.30
98.30
86.40
80.60
104.10
108.20
93.40
71.90
94.10
94.90
96.40
91.10
84.40
86.40
88.00
75.10
109.70
103.00
82.10
68.00
96.40
94.30
90.00
88.00
76.10
82.50
81.40
66.50
97.20
94.10
80.70
70.50
87.80
89.50
99.60
84.20
75.10
92.00
80.80
73.10
99.80
90.00
83.10
72.40
78.80
87.30
91.00
80.10
73.60
86.40
74.50
71.20
92.40
81.50
85.30
69.90
84.20
90.70
100.30

Tables (Output of Computation)





Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135

\begin{tabular}{lllllllll}
\hline
Summary of computational transaction \tabularnewline
Raw Input & view raw input (R code)  \tabularnewline
Raw Output & view raw output of R engine  \tabularnewline
Computing time & 1 seconds \tabularnewline
R Server & 'Gwilym Jenkins' @ 72.249.127.135 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=19190&T=0

[TABLE]
[ROW][C]Summary of computational transaction[/C][/ROW]
[ROW][C]Raw Input[/C][C]view raw input (R code) [/C][/ROW]
[ROW][C]Raw Output[/C][C]view raw output of R engine [/C][/ROW]
[ROW][C]Computing time[/C][C]1 seconds[/C][/ROW]
[ROW][C]R Server[/C][C]'Gwilym Jenkins' @ 72.249.127.135[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=19190&T=0

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=19190&T=0

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135






Autocorrelation Function
Time lag kACF(k)T-STATP-value
10.1348681.05340.148167
2-0.230388-1.79940.038452
3-0.025856-0.20190.420317
40.2268231.77150.040733
50.1893471.47880.072164
60.1969711.53840.064562
70.0967310.75550.226431
80.1573531.2290.111903
9-0.121757-0.9510.172691
10-0.273532-2.13640.018336
110.0938150.73270.233269
120.6218644.85694e-06
13-0.008279-0.06470.474327
14-0.26372-2.05970.02185
15-0.145361-1.13530.130345
160.1151760.89960.185948
170.1370871.07070.144266

\begin{tabular}{lllllllll}
\hline
Autocorrelation Function \tabularnewline
Time lag k & ACF(k) & T-STAT & P-value \tabularnewline
1 & 0.134868 & 1.0534 & 0.148167 \tabularnewline
2 & -0.230388 & -1.7994 & 0.038452 \tabularnewline
3 & -0.025856 & -0.2019 & 0.420317 \tabularnewline
4 & 0.226823 & 1.7715 & 0.040733 \tabularnewline
5 & 0.189347 & 1.4788 & 0.072164 \tabularnewline
6 & 0.196971 & 1.5384 & 0.064562 \tabularnewline
7 & 0.096731 & 0.7555 & 0.226431 \tabularnewline
8 & 0.157353 & 1.229 & 0.111903 \tabularnewline
9 & -0.121757 & -0.951 & 0.172691 \tabularnewline
10 & -0.273532 & -2.1364 & 0.018336 \tabularnewline
11 & 0.093815 & 0.7327 & 0.233269 \tabularnewline
12 & 0.621864 & 4.8569 & 4e-06 \tabularnewline
13 & -0.008279 & -0.0647 & 0.474327 \tabularnewline
14 & -0.26372 & -2.0597 & 0.02185 \tabularnewline
15 & -0.145361 & -1.1353 & 0.130345 \tabularnewline
16 & 0.115176 & 0.8996 & 0.185948 \tabularnewline
17 & 0.137087 & 1.0707 & 0.144266 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=19190&T=1

[TABLE]
[ROW][C]Autocorrelation Function[/C][/ROW]
[ROW][C]Time lag k[/C][C]ACF(k)[/C][C]T-STAT[/C][C]P-value[/C][/ROW]
[ROW][C]1[/C][C]0.134868[/C][C]1.0534[/C][C]0.148167[/C][/ROW]
[ROW][C]2[/C][C]-0.230388[/C][C]-1.7994[/C][C]0.038452[/C][/ROW]
[ROW][C]3[/C][C]-0.025856[/C][C]-0.2019[/C][C]0.420317[/C][/ROW]
[ROW][C]4[/C][C]0.226823[/C][C]1.7715[/C][C]0.040733[/C][/ROW]
[ROW][C]5[/C][C]0.189347[/C][C]1.4788[/C][C]0.072164[/C][/ROW]
[ROW][C]6[/C][C]0.196971[/C][C]1.5384[/C][C]0.064562[/C][/ROW]
[ROW][C]7[/C][C]0.096731[/C][C]0.7555[/C][C]0.226431[/C][/ROW]
[ROW][C]8[/C][C]0.157353[/C][C]1.229[/C][C]0.111903[/C][/ROW]
[ROW][C]9[/C][C]-0.121757[/C][C]-0.951[/C][C]0.172691[/C][/ROW]
[ROW][C]10[/C][C]-0.273532[/C][C]-2.1364[/C][C]0.018336[/C][/ROW]
[ROW][C]11[/C][C]0.093815[/C][C]0.7327[/C][C]0.233269[/C][/ROW]
[ROW][C]12[/C][C]0.621864[/C][C]4.8569[/C][C]4e-06[/C][/ROW]
[ROW][C]13[/C][C]-0.008279[/C][C]-0.0647[/C][C]0.474327[/C][/ROW]
[ROW][C]14[/C][C]-0.26372[/C][C]-2.0597[/C][C]0.02185[/C][/ROW]
[ROW][C]15[/C][C]-0.145361[/C][C]-1.1353[/C][C]0.130345[/C][/ROW]
[ROW][C]16[/C][C]0.115176[/C][C]0.8996[/C][C]0.185948[/C][/ROW]
[ROW][C]17[/C][C]0.137087[/C][C]1.0707[/C][C]0.144266[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=19190&T=1

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=19190&T=1

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Autocorrelation Function
Time lag kACF(k)T-STATP-value
10.1348681.05340.148167
2-0.230388-1.79940.038452
3-0.025856-0.20190.420317
40.2268231.77150.040733
50.1893471.47880.072164
60.1969711.53840.064562
70.0967310.75550.226431
80.1573531.2290.111903
9-0.121757-0.9510.172691
10-0.273532-2.13640.018336
110.0938150.73270.233269
120.6218644.85694e-06
13-0.008279-0.06470.474327
14-0.26372-2.05970.02185
15-0.145361-1.13530.130345
160.1151760.89960.185948
170.1370871.07070.144266






Partial Autocorrelation Function
Time lag kPACF(k)T-STATP-value
10.1348681.05340.148167
2-0.253183-1.97740.026259
30.0513990.40140.344751
40.1792421.39990.083301
50.1406331.09840.138178
60.2718562.12330.018899
70.1344911.05040.148838
80.2529031.97520.026385
9-0.200811-1.56840.060983
10-0.378002-2.95230.002236
11-0.137616-1.07480.143345
120.4737473.70010.000232
13-0.089353-0.69790.243955
140.0727080.56790.286104
15-0.09552-0.7460.229255
16-0.014972-0.11690.453649
17-0.008653-0.06760.473169

\begin{tabular}{lllllllll}
\hline
Partial Autocorrelation Function \tabularnewline
Time lag k & PACF(k) & T-STAT & P-value \tabularnewline
1 & 0.134868 & 1.0534 & 0.148167 \tabularnewline
2 & -0.253183 & -1.9774 & 0.026259 \tabularnewline
3 & 0.051399 & 0.4014 & 0.344751 \tabularnewline
4 & 0.179242 & 1.3999 & 0.083301 \tabularnewline
5 & 0.140633 & 1.0984 & 0.138178 \tabularnewline
6 & 0.271856 & 2.1233 & 0.018899 \tabularnewline
7 & 0.134491 & 1.0504 & 0.148838 \tabularnewline
8 & 0.252903 & 1.9752 & 0.026385 \tabularnewline
9 & -0.200811 & -1.5684 & 0.060983 \tabularnewline
10 & -0.378002 & -2.9523 & 0.002236 \tabularnewline
11 & -0.137616 & -1.0748 & 0.143345 \tabularnewline
12 & 0.473747 & 3.7001 & 0.000232 \tabularnewline
13 & -0.089353 & -0.6979 & 0.243955 \tabularnewline
14 & 0.072708 & 0.5679 & 0.286104 \tabularnewline
15 & -0.09552 & -0.746 & 0.229255 \tabularnewline
16 & -0.014972 & -0.1169 & 0.453649 \tabularnewline
17 & -0.008653 & -0.0676 & 0.473169 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=19190&T=2

[TABLE]
[ROW][C]Partial Autocorrelation Function[/C][/ROW]
[ROW][C]Time lag k[/C][C]PACF(k)[/C][C]T-STAT[/C][C]P-value[/C][/ROW]
[ROW][C]1[/C][C]0.134868[/C][C]1.0534[/C][C]0.148167[/C][/ROW]
[ROW][C]2[/C][C]-0.253183[/C][C]-1.9774[/C][C]0.026259[/C][/ROW]
[ROW][C]3[/C][C]0.051399[/C][C]0.4014[/C][C]0.344751[/C][/ROW]
[ROW][C]4[/C][C]0.179242[/C][C]1.3999[/C][C]0.083301[/C][/ROW]
[ROW][C]5[/C][C]0.140633[/C][C]1.0984[/C][C]0.138178[/C][/ROW]
[ROW][C]6[/C][C]0.271856[/C][C]2.1233[/C][C]0.018899[/C][/ROW]
[ROW][C]7[/C][C]0.134491[/C][C]1.0504[/C][C]0.148838[/C][/ROW]
[ROW][C]8[/C][C]0.252903[/C][C]1.9752[/C][C]0.026385[/C][/ROW]
[ROW][C]9[/C][C]-0.200811[/C][C]-1.5684[/C][C]0.060983[/C][/ROW]
[ROW][C]10[/C][C]-0.378002[/C][C]-2.9523[/C][C]0.002236[/C][/ROW]
[ROW][C]11[/C][C]-0.137616[/C][C]-1.0748[/C][C]0.143345[/C][/ROW]
[ROW][C]12[/C][C]0.473747[/C][C]3.7001[/C][C]0.000232[/C][/ROW]
[ROW][C]13[/C][C]-0.089353[/C][C]-0.6979[/C][C]0.243955[/C][/ROW]
[ROW][C]14[/C][C]0.072708[/C][C]0.5679[/C][C]0.286104[/C][/ROW]
[ROW][C]15[/C][C]-0.09552[/C][C]-0.746[/C][C]0.229255[/C][/ROW]
[ROW][C]16[/C][C]-0.014972[/C][C]-0.1169[/C][C]0.453649[/C][/ROW]
[ROW][C]17[/C][C]-0.008653[/C][C]-0.0676[/C][C]0.473169[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=19190&T=2

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=19190&T=2

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Partial Autocorrelation Function
Time lag kPACF(k)T-STATP-value
10.1348681.05340.148167
2-0.253183-1.97740.026259
30.0513990.40140.344751
40.1792421.39990.083301
50.1406331.09840.138178
60.2718562.12330.018899
70.1344911.05040.148838
80.2529031.97520.026385
9-0.200811-1.56840.060983
10-0.378002-2.95230.002236
11-0.137616-1.07480.143345
120.4737473.70010.000232
13-0.089353-0.69790.243955
140.0727080.56790.286104
15-0.09552-0.7460.229255
16-0.014972-0.11690.453649
17-0.008653-0.06760.473169


Figures (Output of Computation)

Input Parameters & R Code

Parameters (Session):
par1 = 0 ; par2 = 0 ;
Parameters (R input):
par1 = Default ; par2 = 1 ; par3 = 0 ; par4 = 0 ; par5 = 12 ;
R code (references can be found in the software module):
if (par1 == 'Default') {
par1 = 10*log10(length(x))
} else {
par1 <- as.numeric(par1)
}
par2 <- as.numeric(par2)
par3 <- as.numeric(par3)
par4 <- as.numeric(par4)
par5 <- as.numeric(par5)
if (par2 == 0) {
x <- log(x)
} else {
x <- (x ^ par2 - 1) / par2
}
if (par3 > 0) x <- diff(x,lag=1,difference=par3)
if (par4 > 0) x <- diff(x,lag=par5,difference=par4)
bitmap(file='pic1.png')
racf <- acf(x,par1,main='Autocorrelation',xlab='lags',ylab='ACF')
dev.off()
bitmap(file='pic2.png')
rpacf <- pacf(x,par1,main='Partial Autocorrelation',xlab='lags',ylab='PACF')
dev.off()
(myacf <- c(racf$acf))
(mypacf <- c(rpacf$acf))
lengthx <- length(x)
sqrtn <- sqrt(lengthx)
load(file='createtable')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,'Autocorrelation Function',4,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Time lag k',header=TRUE)
a<-table.element(a,hyperlink('basics.htm','ACF(k)','click here for more information about the Autocorrelation Function'),header=TRUE)
a<-table.element(a,'T-STAT',header=TRUE)
a<-table.element(a,'P-value',header=TRUE)
a<-table.row.end(a)
for (i in 2:(par1+1)) {
a<-table.row.start(a)
a<-table.element(a,i-1,header=TRUE)
a<-table.element(a,round(myacf[i],6))
mytstat <- myacf[i]*sqrtn
a<-table.element(a,round(mytstat,4))
a<-table.element(a,round(1-pt(abs(mytstat),lengthx),6))
a<-table.row.end(a)
}
a<-table.end(a)
table.save(a,file='mytable.tab')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,'Partial Autocorrelation Function',4,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Time lag k',header=TRUE)
a<-table.element(a,hyperlink('basics.htm','PACF(k)','click here for more information about the Partial Autocorrelation Function'),header=TRUE)
a<-table.element(a,'T-STAT',header=TRUE)
a<-table.element(a,'P-value',header=TRUE)
a<-table.row.end(a)
for (i in 1:par1) {
a<-table.row.start(a)
a<-table.element(a,i,header=TRUE)
a<-table.element(a,round(mypacf[i],6))
mytstat <- mypacf[i]*sqrtn
a<-table.element(a,round(mytstat,4))
a<-table.element(a,round(1-pt(abs(mytstat),lengthx),6))
a<-table.row.end(a)
}
a<-table.end(a)
table.save(a,file='mytable1.tab')