FreeStatistics.org

Free Statistics

of Irreproducible Research!

Description of Statistical Computation

Author's title

Author*The author of this computation has been verified*
R Software Modulerwasp_hypothesismean1.wasp
Title produced by softwareTesting Mean with known Variance - Critical Value
Date of computationThu, 13 Nov 2008 12:32:32 -0700
Cite this page as followsStatistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?v=date/2008/Nov/13/t1226604790s5rs01d18ibgm9g.htm/, Retrieved Sun, 19 May 2024 08:51:58 +0000
Statistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?pk=24789, Retrieved Sun, 19 May 2024 08:51:58 +0000
QR Codes:

Original text written by user:
IsPrivate?No (this computation is public)
User-defined keywordsTesting mean with known variance
Estimated Impact129

Tree of Dependent Computations

Family? (F = Feedback message, R = changed R code, M = changed R Module, P = changed Parameters, D = changed Data)
F       [Testing Mean with known Variance - Critical Value] [Testing mean with...] [2008-11-13 19:32:32] [962e6c9020896982bc8283b8971710a9] [Current]
Feedback Forum
2008-11-20 15:41:02 [Steven Vanhooreweghe] [reply] 
Het klopt helemaal. De voornaamste reden dat we hier een eenzijdige test gebruiken is omdat de leverancier een economisch voordeel heeft met het leveren van meer vet: dat is namelijk goedkoper
2008-11-23 11:39:38 [Liese Drijkoningen] [reply] 
De student heeft de juiste oplossing gegeven. Ik probeer hier nog enkele dingen aan toe te voegen. De kritische waarde bedraagt 18,46% en het steekproefgemiddelde bedroeg 15,46%. Omdat deze laatste waarde de kritische waarde niet overschrijdt, kunnen we zeggen dat er sprake is van een toevallige afwijking ten opzichte van het contractueel bepaalde vetgehalte. We verwerpen de nulhypothese dus niet. De student heeft ook een goede verklaring gegeven waarom hij de one-side test gebruikt. Zoals de student ookal zei, dienen we geen klacht in.
2008-11-23 20:53:13 [Peter Van Doninck] [reply] 
De conclusie is correct gemaakt ivm de critical value en het steekproefgemiddelde. De student heeft gelijk als ze werkt met een one sided tail. Er kan ook toegevoegd worden dat er gebruik gemaakt kan worden van een two sided tail. Bij deze analyse kan men zien of er te veel of te weinig vet is. De null hypothese wordt niet verworpen. Het gevonden percentage 15,46% ligt tussen de 11% en de 19,5%, zijnde het 95% betrouwbaarheidsinterval.

Post a new message

Dataset

Tables (Output of Computation)





Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135

\begin{tabular}{lllllllll}
\hline
Summary of computational transaction \tabularnewline
Raw Input & view raw input (R code)  \tabularnewline
Raw Output & view raw output of R engine  \tabularnewline
Computing time & 1 seconds \tabularnewline
R Server & 'Gwilym Jenkins' @ 72.249.127.135 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=24789&T=0

[TABLE]
[ROW][C]Summary of computational transaction[/C][/ROW]
[ROW][C]Raw Input[/C][C]view raw input (R code) [/C][/ROW]
[ROW][C]Raw Output[/C][C]view raw output of R engine [/C][/ROW]
[ROW][C]Computing time[/C][C]1 seconds[/C][/ROW]
[ROW][C]R Server[/C][C]'Gwilym Jenkins' @ 72.249.127.135[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=24789&T=0

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=24789&T=0

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135






Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
critical value (one-tailed)0.184676559191704
confidence interval (two-tailed)(sample mean)[ 0.113280331179696 , 0.195919668820304 ]
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis

\begin{tabular}{lllllllll}
\hline
Testing Mean with known Variance \tabularnewline
sample size & 27 \tabularnewline
population variance & 0.012 \tabularnewline
sample mean & 0.1546 \tabularnewline
null hypothesis about mean & 0.15 \tabularnewline
type I error & 0.05 \tabularnewline
critical value (one-tailed) & 0.184676559191704 \tabularnewline
confidence interval (two-tailed)(sample mean) & [ 0.113280331179696 ,  0.195919668820304 ] \tabularnewline
conclusion for one-tailed test \tabularnewline
Do not reject the null hypothesis. \tabularnewline
conclusion for two-tailed test \tabularnewline
Do not reject the null hypothesis \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=24789&T=1

[TABLE]
[ROW][C]Testing Mean with known Variance[/C][/ROW]
[ROW][C]sample size[/C][C]27[/C][/ROW]
[ROW][C]population variance[/C][C]0.012[/C][/ROW]
[ROW][C]sample mean[/C][C]0.1546[/C][/ROW]
[ROW][C]null hypothesis about mean[/C][C]0.15[/C][/ROW]
[ROW][C]type I error[/C][C]0.05[/C][/ROW]
[ROW][C]critical value (one-tailed)[/C][C]0.184676559191704[/C][/ROW]
[ROW][C]confidence interval (two-tailed)(sample mean)[/C][C][ 0.113280331179696 ,  0.195919668820304 ][/C][/ROW]
[ROW][C]conclusion for one-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis.[/C][/ROW]
[ROW][C]conclusion for two-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=24789&T=1

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=24789&T=1

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
critical value (one-tailed)0.184676559191704
confidence interval (two-tailed)(sample mean)[ 0.113280331179696 , 0.195919668820304 ]
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis


Figures (Output of Computation)

Input Parameters & R Code

Parameters (Session):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
Parameters (R input):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
R code (references can be found in the software module):
par1<-as.numeric(par1)
par2<-as.numeric(par2)
par3<-as.numeric(par3)
par4<-as.numeric(par4)
par5<-as.numeric(par5)
c <- 'NA'
csn <- abs(qnorm(par5))
csn2 <- abs(qnorm(par5/2))
if (par3 == par4)
{
conclusion <- 'Error: the null hypothesis and sample mean must not be equal.'
conclusion2 <- conclusion
} else {
cleft <- par3 - csn2 * sqrt(par2) / sqrt(par1)
cright <- par3 + csn2 * sqrt(par2) / sqrt(par1)
c2 <- paste('[',cleft)
c2 <- paste(c2,', ')
c2 <- paste(c2,cright)
c2 <- paste(c2,']')
if ((par4 < cleft) | (par4 > cright))
{
conclusion2 <- 'Reject the null hypothesis'
} else {
conclusion2 <- 'Do not reject the null hypothesis'
}
}
if (par3 > par4)
{
c <- par4 + csn * sqrt(par2) / sqrt(par1)
if (par3 < c)
{
conclusion <- 'Do not reject the null hypothesis.'
} else {
conclusion <- 'Reject the null hypothesis.'
}
}
if (par3 < par4)
{
c <- par4 - csn * sqrt(par2) / sqrt(par1)
if (par3 > c)
{
conclusion <- 'Do not reject the null hypothesis.'
} else {
conclusion <- 'Reject the null hypothesis.'
}
}
c
conclusion
load(file='createtable')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,hyperlink('ht_mean_knownvar.htm','Testing Mean with known Variance','learn more about Statistical Hypothesis Testing about the Mean when the Variance is known'),2,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample size',header=TRUE)
a<-table.element(a,par1)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'population variance',header=TRUE)
a<-table.element(a,par2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample mean',header=TRUE)
a<-table.element(a,par3)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'null hypothesis about mean',header=TRUE)
a<-table.element(a,par4)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'type I error',header=TRUE)
a<-table.element(a,par5)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,hyperlink('ht_mean_knownvar.htm#overview','critical value (one-tailed)','about the critical value'),header=TRUE)
a<-table.element(a,c)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'confidence interval (two-tailed)
(sample mean)',header=TRUE)
a<-table.element(a,c2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for one-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion,2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for two-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion2,2)
a<-table.row.end(a)
a<-table.end(a)
table.save(a,file='mytable.tab')