FreeStatistics.org

Free Statistics

of Irreproducible Research!

Description of Statistical Computation

Author's title

Author*The author of this computation has been verified*
R Software Modulerwasp_hypothesismean1.wasp
Title produced by softwareTesting Mean with known Variance - Critical Value
Date of computationThu, 13 Nov 2008 03:12:24 -0700
Cite this page as followsStatistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?v=date/2008/Nov/13/t1226571206y7f6u0q373ljz6g.htm/, Retrieved Sun, 19 May 2024 12:16:57 +0000
Statistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?pk=24544, Retrieved Sun, 19 May 2024 12:16:57 +0000
QR Codes:

Original text written by user:
IsPrivate?No (this computation is public)
User-defined keywordsTesting mean with known variance - Critical Value
Estimated Impact160

Tree of Dependent Computations

Family? (F = Feedback message, R = changed R code, M = changed R Module, P = changed Parameters, D = changed Data)
-     [Testing Mean with known Variance - Critical Value] [Testing mean with...] [2008-11-13 10:00:13] [c96f3dce3a823a83b6ede18389e1cfd4]
F   P     [Testing Mean with known Variance - Critical Value] [Testing mean with...] [2008-11-13 10:12:24] [3bdbbe597ac6c61989658933956ee6ac] [Current]
Feedback Forum
2008-11-15 10:50:18 [a7d9990a66ef13b6ce566dbfd4dc5418] [reply] 
Klopt!
2008-11-15 13:11:33 [Käthe Vanderheggen] [reply] 
Goede berekening en conclusie maar er wordt niet geargumenteerd waarom we een one-tailed of two-tailed test zouden gebruikten:
wanneer we veronderstellen dat het vlees niet te veel of te weinig vet mag bevatten om bv de smaak op peil te houden, gebruiken we een two-tailed test.
wanneer we echter veronderstellen dat de producent enkel teveel vet zal toevoegen en niet te weinig om de kosten van het vlees te drukken, maken we gebruik van een one-tailed test.
2008-11-17 10:46:39 [c798c834ef86cb6aaf2fcb10ea683230] [reply] 
het gaat om een twee zijdig probleem: het vetpercentage moet tussen een bepaald interval liggen, we moeten dus met de two-tailed test werken.
Deze test geeft aan dat het vetpercentage tussen 11.33% en 19.59% moet liggen. Uit de resultaten van de test blijkt dat het gemiddelde 15.46% bedraagt, en dus binnen het interval ligt.
Er moet geen klacht ingediend worden omdat het maximum vet percentage niet overschreden wordt.
2008-11-24 10:49:21 [Yannick Van Schil] [reply] 
Goede berekeningen, maar er wordt niet gekozen voor een two-tailed test. Men mag hier ook opteren voor een one tail test mits juiste argumentatie

Post a new message

Dataset

Tables (Output of Computation)





Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135

\begin{tabular}{lllllllll}
\hline
Summary of computational transaction \tabularnewline
Raw Input & view raw input (R code)  \tabularnewline
Raw Output & view raw output of R engine  \tabularnewline
Computing time & 1 seconds \tabularnewline
R Server & 'Gwilym Jenkins' @ 72.249.127.135 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=24544&T=0

[TABLE]
[ROW][C]Summary of computational transaction[/C][/ROW]
[ROW][C]Raw Input[/C][C]view raw input (R code) [/C][/ROW]
[ROW][C]Raw Output[/C][C]view raw output of R engine [/C][/ROW]
[ROW][C]Computing time[/C][C]1 seconds[/C][/ROW]
[ROW][C]R Server[/C][C]'Gwilym Jenkins' @ 72.249.127.135[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=24544&T=0

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=24544&T=0

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135






Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
critical value (one-tailed)0.184676559191704
confidence interval (two-tailed)(sample mean)[ 0.113280331179696 , 0.195919668820304 ]
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis

\begin{tabular}{lllllllll}
\hline
Testing Mean with known Variance \tabularnewline
sample size & 27 \tabularnewline
population variance & 0.012 \tabularnewline
sample mean & 0.1546 \tabularnewline
null hypothesis about mean & 0.15 \tabularnewline
type I error & 0.05 \tabularnewline
critical value (one-tailed) & 0.184676559191704 \tabularnewline
confidence interval (two-tailed)(sample mean) & [ 0.113280331179696 ,  0.195919668820304 ] \tabularnewline
conclusion for one-tailed test \tabularnewline
Do not reject the null hypothesis. \tabularnewline
conclusion for two-tailed test \tabularnewline
Do not reject the null hypothesis \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=24544&T=1

[TABLE]
[ROW][C]Testing Mean with known Variance[/C][/ROW]
[ROW][C]sample size[/C][C]27[/C][/ROW]
[ROW][C]population variance[/C][C]0.012[/C][/ROW]
[ROW][C]sample mean[/C][C]0.1546[/C][/ROW]
[ROW][C]null hypothesis about mean[/C][C]0.15[/C][/ROW]
[ROW][C]type I error[/C][C]0.05[/C][/ROW]
[ROW][C]critical value (one-tailed)[/C][C]0.184676559191704[/C][/ROW]
[ROW][C]confidence interval (two-tailed)(sample mean)[/C][C][ 0.113280331179696 ,  0.195919668820304 ][/C][/ROW]
[ROW][C]conclusion for one-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis.[/C][/ROW]
[ROW][C]conclusion for two-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=24544&T=1

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=24544&T=1

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
critical value (one-tailed)0.184676559191704
confidence interval (two-tailed)(sample mean)[ 0.113280331179696 , 0.195919668820304 ]
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis


Figures (Output of Computation)

Input Parameters & R Code

Parameters (Session):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
Parameters (R input):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
R code (references can be found in the software module):
par1<-as.numeric(par1)
par2<-as.numeric(par2)
par3<-as.numeric(par3)
par4<-as.numeric(par4)
par5<-as.numeric(par5)
c <- 'NA'
csn <- abs(qnorm(par5))
csn2 <- abs(qnorm(par5/2))
if (par3 == par4)
{
conclusion <- 'Error: the null hypothesis and sample mean must not be equal.'
conclusion2 <- conclusion
} else {
cleft <- par3 - csn2 * sqrt(par2) / sqrt(par1)
cright <- par3 + csn2 * sqrt(par2) / sqrt(par1)
c2 <- paste('[',cleft)
c2 <- paste(c2,', ')
c2 <- paste(c2,cright)
c2 <- paste(c2,']')
if ((par4 < cleft) | (par4 > cright))
{
conclusion2 <- 'Reject the null hypothesis'
} else {
conclusion2 <- 'Do not reject the null hypothesis'
}
}
if (par3 > par4)
{
c <- par4 + csn * sqrt(par2) / sqrt(par1)
if (par3 < c)
{
conclusion <- 'Do not reject the null hypothesis.'
} else {
conclusion <- 'Reject the null hypothesis.'
}
}
if (par3 < par4)
{
c <- par4 - csn * sqrt(par2) / sqrt(par1)
if (par3 > c)
{
conclusion <- 'Do not reject the null hypothesis.'
} else {
conclusion <- 'Reject the null hypothesis.'
}
}
c
conclusion
load(file='createtable')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,hyperlink('ht_mean_knownvar.htm','Testing Mean with known Variance','learn more about Statistical Hypothesis Testing about the Mean when the Variance is known'),2,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample size',header=TRUE)
a<-table.element(a,par1)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'population variance',header=TRUE)
a<-table.element(a,par2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample mean',header=TRUE)
a<-table.element(a,par3)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'null hypothesis about mean',header=TRUE)
a<-table.element(a,par4)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'type I error',header=TRUE)
a<-table.element(a,par5)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,hyperlink('ht_mean_knownvar.htm#overview','critical value (one-tailed)','about the critical value'),header=TRUE)
a<-table.element(a,c)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'confidence interval (two-tailed)
(sample mean)',header=TRUE)
a<-table.element(a,c2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for one-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion,2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for two-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion2,2)
a<-table.row.end(a)
a<-table.end(a)
table.save(a,file='mytable.tab')