FreeStatistics.org

Free Statistics

of Irreproducible Research!

Description of Statistical Computation

Author's title

Author*The author of this computation has been verified*
R Software Modulerwasp_hypothesismean2.wasp
Title produced by softwareTesting Mean with known Variance - p-value
Date of computationThu, 13 Nov 2008 03:10:09 -0700
Cite this page as followsStatistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?v=date/2008/Nov/13/t12265711202d8bw5ccvz5blrp.htm/, Retrieved Sun, 19 May 2024 10:22:25 +0000
Statistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?pk=24543, Retrieved Sun, 19 May 2024 10:22:25 +0000
QR Codes:

Original text written by user:
IsPrivate?No (this computation is public)
User-defined keywords
Estimated Impact147

Tree of Dependent Computations

Family? (F = Feedback message, R = changed R code, M = changed R Module, P = changed Parameters, D = changed Data)
F       [Testing Mean with known Variance - p-value] [pork quality test...] [2008-11-13 10:10:09] [c4248bbb85fa4e400deddbf50234dcae] [Current]
Feedback Forum
2008-11-15 16:27:41 [Charis Berrevoets] [reply] 
Je hebt de juiste berekening gebruikt en ook de juiste gegevens ingegeven. Voor je conclusie gebruik je echter de 2-zijdige test terwijl je eigenlijk de 1-zijdige had moeten gebruiken. Je vermoedt immers dat de leverancier goedkoop vlees verkoopt, waar dus te veel vet in zit. Je moet dus enkel testen of er inderdaad te veel vet in zit, en dus is een 1-zijdige test voldoende. Uiteindelijk komt dit er ook op neer dat je geen klacht gaat indienen, omdat de kans dat je je vergist dan nog steeds 41% is. Maar dit is toch al veel kleiner dan de 83% uit de 1-zijdige test.
Verder moet je ook oppassen ivm de p-waarde. Deze moet immers niet áltijd kleiner zijn dan 5%, zoals we in het college hebben gezien kan dit soms op een hoger percentage bepaald worden.
2008-11-18 16:58:41 [72e979bcc364082694890d2eccc1a66f] [reply] 
De student heeft de p-value van de 2-sided test gebruikt. Er moet echter gebruik gemaakt worden van de 1-sided test. Daar kan je dan aflezen dat er 41% kans is dat je je vergist bij het verwerpen. Het is ook zo dat de p-value onder 5% moet liggen om aan de betrouwbaarheid te voldoen.
2008-11-20 16:01:26 [Steven Vanhooreweghe] [reply] 
Er is een sterk vermoeden dat de leverancier “foefelt”, dus nu kan je maar in 1 richting denken: de leverancier levert te veel vet want dat is goedkoper (one sided). De kans dat u zich vergist als u een klacht indient is 41%, de nulhypothese mag niet verworpen worden. Jij hebt hier dus een two-sided test gebruikt, de berekening is wel juist.
2008-11-22 20:13:12 [Jessica Alves Pires] [reply] 
Ik ben het eens met de voorgaande opmerkingen. Je berekening is juist maar je had inderdaad gebruik moeten maken van een eenzijdige test. Het zou dus dom zijn om een klacht in te dienen aangezien er 41% kans is dat je je vergist.

Post a new message

Dataset

Tables (Output of Computation)





Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135

\begin{tabular}{lllllllll}
\hline
Summary of computational transaction \tabularnewline
Raw Input & view raw input (R code)  \tabularnewline
Raw Output & view raw output of R engine  \tabularnewline
Computing time & 1 seconds \tabularnewline
R Server & 'Gwilym Jenkins' @ 72.249.127.135 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=24543&T=0

[TABLE]
[ROW][C]Summary of computational transaction[/C][/ROW]
[ROW][C]Raw Input[/C][C]view raw input (R code) [/C][/ROW]
[ROW][C]Raw Output[/C][C]view raw output of R engine [/C][/ROW]
[ROW][C]Computing time[/C][C]1 seconds[/C][/ROW]
[ROW][C]R Server[/C][C]'Gwilym Jenkins' @ 72.249.127.135[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=24543&T=0

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=24543&T=0

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Summary of computational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135






Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
Z-value0.218197158551618
p-value (one-tailed)0.413637749448374
p-value (two-tailed)0.827275498896748
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis

\begin{tabular}{lllllllll}
\hline
Testing Mean with known Variance \tabularnewline
sample size & 27 \tabularnewline
population variance & 0.012 \tabularnewline
sample mean & 0.1546 \tabularnewline
null hypothesis about mean & 0.15 \tabularnewline
type I error & 0.05 \tabularnewline
Z-value & 0.218197158551618 \tabularnewline
p-value (one-tailed) & 0.413637749448374 \tabularnewline
p-value (two-tailed) & 0.827275498896748 \tabularnewline
conclusion for one-tailed test \tabularnewline
Do not reject the null hypothesis. \tabularnewline
conclusion for two-tailed test \tabularnewline
Do not reject the null hypothesis \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=24543&T=1

[TABLE]
[ROW][C]Testing Mean with known Variance[/C][/ROW]
[ROW][C]sample size[/C][C]27[/C][/ROW]
[ROW][C]population variance[/C][C]0.012[/C][/ROW]
[ROW][C]sample mean[/C][C]0.1546[/C][/ROW]
[ROW][C]null hypothesis about mean[/C][C]0.15[/C][/ROW]
[ROW][C]type I error[/C][C]0.05[/C][/ROW]
[ROW][C]Z-value[/C][C]0.218197158551618[/C][/ROW]
[ROW][C]p-value (one-tailed)[/C][C]0.413637749448374[/C][/ROW]
[ROW][C]p-value (two-tailed)[/C][C]0.827275498896748[/C][/ROW]
[ROW][C]conclusion for one-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis.[/C][/ROW]
[ROW][C]conclusion for two-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=24543&T=1

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=24543&T=1

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
Z-value0.218197158551618
p-value (one-tailed)0.413637749448374
p-value (two-tailed)0.827275498896748
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis


Figures (Output of Computation)

Input Parameters & R Code

Parameters (Session):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
Parameters (R input):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
R code (references can be found in the software module):
par1<-as.numeric(par1)
par2<-as.numeric(par2)
par3<-as.numeric(par3)
par4<-as.numeric(par4)
par5<-as.numeric(par5)
c <- 'NA'
csn <- abs(qnorm(par5))
csn2 <- abs(qnorm(par5/2))
z <- (par3 - par4) / (sqrt(par2/par1))
p <- 1-pnorm(z)
if (par3 == par4)
{
conclusion <- 'Error: the null hypothesis and sample mean must not be equal.'
conclusion2 <- conclusion
} else {
if (p < par5/2)
{
conclusion2 <- 'Reject the null hypothesis'
} else {
conclusion2 <- 'Do not reject the null hypothesis'
}
}
if (p < par5)
{
conclusion <- 'Reject the null hypothesis.'
} else {
conclusion <- 'Do not reject the null hypothesis.'
}
p
conclusion
load(file='createtable')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,hyperlink('ht_mean_knownvar.htm','Testing Mean with known Variance','learn more about Statistical Hypothesis Testing about the Mean when the Variance is known'),2,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample size',header=TRUE)
a<-table.element(a,par1)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'population variance',header=TRUE)
a<-table.element(a,par2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample mean',header=TRUE)
a<-table.element(a,par3)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'null hypothesis about mean',header=TRUE)
a<-table.element(a,par4)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'type I error',header=TRUE)
a<-table.element(a,par5)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Z-value',header=TRUE)
a<-table.element(a,z)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'p-value (one-tailed)',header=TRUE)
a<-table.element(a,p)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'p-value (two-tailed)',header=TRUE)
a<-table.element(a,p*2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for one-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion,2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for two-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion2,2)
a<-table.row.end(a)
a<-table.end(a)
table.save(a,file='mytable.tab')