FreeStatistics.org

Free Statistics

of Irreproducible Research!

Description of Statistical Computation

Author's title

Author*Unverified author*
R Software Modulerwasp_hypothesismean2.wasp
Title produced by softwareTesting Mean with known Variance - p-value
Date of computationSun, 11 Nov 2007 11:11:54 -0700
Cite this page as followsStatistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?v=date/2007/Nov/11/t1194804490e1rosgr1tbqv34y.htm/, Retrieved Sun, 05 May 2024 19:13:50 +0000
Statistical Computations at FreeStatistics.org, Office for Research Development and Education, URL https://freestatistics.org/blog/index.php?pk=5129, Retrieved Sun, 05 May 2024 19:13:50 +0000
QR Codes:

Original text written by user:
IsPrivate?No (this computation is public)
User-defined keywordsgdm
Estimated Impact214

Tree of Dependent Computations

Family? (F = Feedback message, R = changed R code, M = changed R Module, P = changed Parameters, D = changed Data)
F       [Testing Mean with known Variance - p-value] [WS01_Q02] [2007-11-11 18:11:54] [0e5ab1b1957e18e1f5756e6ba8f9244f] [Current]
Feedback Forum
2008-11-16 18:50:41 [006ad2c49b6a7c2ad6ab685cfc1dae56] [reply] 
Door de hoge kans dat je je vergist bij het verwerpen van de nulhypothese dienen we toch geen klacht in. Het verschil tussen 15% en 15,46% is te wijten aan toeval.

2008-11-18 19:03:00 [Vincent Vanden Poel] [reply] 
Men stelt hier dat de leverancier te veel vet en dus goedkoper levert. De interpretatie die je geeft is correct. Ook heb je de juiste module gehanteerd. Je zou wel nog eens kunnen benadrukken dat het hier dom zou zijn om een advocaat in te huren wegens de grote kans op een vergissing (nl. 41%). Hiervoor kijken we naar de éénzijdige p-waarde.
2008-11-22 19:24:51 [Jessica Alves Pires] [reply] 
Ik ga akkoord met de voorgaande opmerkingen. Je had inderdaad kunnen benadrukken dat er geen klacht wordt geen ingediend. En dat er hier zeker een eenzijdige test moet gebruikt worden omdat er sprake is van een sterk vermoeden van fraude.
2008-11-22 19:27:33 [Jessica Alves Pires] [reply] 
Ik ben het eens met de voorgaande opmerkingen. Je had misschien nog kunnen zeggen dat de incentive om te frauderen voor de leveranicier groot is door de kleine pakkans.
  2008-11-22 19:29:38 [Jessica Alves Pires] [reply] 
Gelieve mijn laatste opmerking te negeren. Die moest bij Q3 gepost worden, niet bij Q2.
2008-11-24 14:35:36 [Julian De Ruyter] [reply] 
Correct antwoord je kan nog wel vermelden dat we met zekerheid kunnen concluderen dat het verschil tussen het resultaat van het lab (15.46%) en het gegeven percentage van de leverancier (15%) toeval is.

Post a new message

Dataset

Tables (Output of Computation)





Summary of compuational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135

\begin{tabular}{lllllllll}
\hline
Summary of compuational transaction \tabularnewline
Raw Input & view raw input (R code)  \tabularnewline
Raw Output & view raw output of R engine  \tabularnewline
Computing time & 1 seconds \tabularnewline
R Server & 'Gwilym Jenkins' @ 72.249.127.135 \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=5129&T=0

[TABLE]
[ROW][C]Summary of compuational transaction[/C][/ROW]
[ROW][C]Raw Input[/C][C]view raw input (R code) [/C][/ROW]
[ROW][C]Raw Output[/C][C]view raw output of R engine [/C][/ROW]
[ROW][C]Computing time[/C][C]1 seconds[/C][/ROW]
[ROW][C]R Server[/C][C]'Gwilym Jenkins' @ 72.249.127.135[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=5129&T=0

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=5129&T=0

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Summary of compuational transaction
Raw Inputview raw input (R code)
Raw Outputview raw output of R engine
Computing time1 seconds
R Server'Gwilym Jenkins' @ 72.249.127.135






Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
Z-value0.218197158551618
p-value (one-tailed)0.413637749448374
p-value (two-tailed)0.827275498896748
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis

\begin{tabular}{lllllllll}
\hline
Testing Mean with known Variance \tabularnewline
sample size & 27 \tabularnewline
population variance & 0.012 \tabularnewline
sample mean & 0.1546 \tabularnewline
null hypothesis about mean & 0.15 \tabularnewline
type I error & 0.05 \tabularnewline
Z-value & 0.218197158551618 \tabularnewline
p-value (one-tailed) & 0.413637749448374 \tabularnewline
p-value (two-tailed) & 0.827275498896748 \tabularnewline
conclusion for one-tailed test \tabularnewline
Do not reject the null hypothesis. \tabularnewline
conclusion for two-tailed test \tabularnewline
Do not reject the null hypothesis \tabularnewline
\hline
\end{tabular}
%Source: https://freestatistics.org/blog/index.php?pk=5129&T=1

[TABLE]
[ROW][C]Testing Mean with known Variance[/C][/ROW]
[ROW][C]sample size[/C][C]27[/C][/ROW]
[ROW][C]population variance[/C][C]0.012[/C][/ROW]
[ROW][C]sample mean[/C][C]0.1546[/C][/ROW]
[ROW][C]null hypothesis about mean[/C][C]0.15[/C][/ROW]
[ROW][C]type I error[/C][C]0.05[/C][/ROW]
[ROW][C]Z-value[/C][C]0.218197158551618[/C][/ROW]
[ROW][C]p-value (one-tailed)[/C][C]0.413637749448374[/C][/ROW]
[ROW][C]p-value (two-tailed)[/C][C]0.827275498896748[/C][/ROW]
[ROW][C]conclusion for one-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis.[/C][/ROW]
[ROW][C]conclusion for two-tailed test[/C][/ROW]
[ROW][C]Do not reject the null hypothesis[/C][/ROW]
[/TABLE]
Source: https://freestatistics.org/blog/index.php?pk=5129&T=1

Globally Unique Identifier (entire table): ba.freestatistics.org/blog/index.php?pk=5129&T=1

As an alternative you can also use a QR Code:  
QR Code


The GUIDs for individual cells are displayed in the table below:

Testing Mean with known Variance
sample size27
population variance0.012
sample mean0.1546
null hypothesis about mean0.15
type I error0.05
Z-value0.218197158551618
p-value (one-tailed)0.413637749448374
p-value (two-tailed)0.827275498896748
conclusion for one-tailed test
Do not reject the null hypothesis.
conclusion for two-tailed test
Do not reject the null hypothesis


Figures (Output of Computation)

Input Parameters & R Code

Parameters (Session):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
Parameters (R input):
par1 = 27 ; par2 = 0.012 ; par3 = 0.1546 ; par4 = 0.15 ; par5 = 0.05 ;
R code (references can be found in the software module):
par1<-as.numeric(par1)
par2<-as.numeric(par2)
par3<-as.numeric(par3)
par4<-as.numeric(par4)
par5<-as.numeric(par5)
c <- 'NA'
csn <- abs(qnorm(par5))
csn2 <- abs(qnorm(par5/2))
z <- (par3 - par4) / (sqrt(par2/par1))
p <- 1-pnorm(z)
if (par3 == par4)
{
conclusion <- 'Error: the null hypothesis and sample mean must not be equal.'
conclusion2 <- conclusion
} else {
if (p < par5/2)
{
conclusion2 <- 'Reject the null hypothesis'
} else {
conclusion2 <- 'Do not reject the null hypothesis'
}
}
if (p < par5)
{
conclusion <- 'Reject the null hypothesis.'
} else {
conclusion <- 'Do not reject the null hypothesis.'
}
p
conclusion
load(file='createtable')
a<-table.start()
a<-table.row.start(a)
a<-table.element(a,hyperlink('ht_mean_knownvar.htm','Testing Mean with known Variance','learn more about Statistical Hypothesis Testing about the Mean when the Variance is known'),2,TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample size',header=TRUE)
a<-table.element(a,par1)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'population variance',header=TRUE)
a<-table.element(a,par2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'sample mean',header=TRUE)
a<-table.element(a,par3)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'null hypothesis about mean',header=TRUE)
a<-table.element(a,par4)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'type I error',header=TRUE)
a<-table.element(a,par5)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'Z-value',header=TRUE)
a<-table.element(a,z)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'p-value (one-tailed)',header=TRUE)
a<-table.element(a,p)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'p-value (two-tailed)',header=TRUE)
a<-table.element(a,p*2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for one-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion,2)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,'conclusion for two-tailed test',2,header=TRUE)
a<-table.row.end(a)
a<-table.row.start(a)
a<-table.element(a,conclusion2,2)
a<-table.row.end(a)
a<-table.end(a)
table.save(a,file='mytable.tab')